Here we go folks, I said on Tuesday in my Tale of Two PJs post that I'd made another pair of pyjamas...and here they are. I'm smiling in the photo but...I just don't like them. There, I've said it.
For this pair of pjs I used the Closet Case Carolyn pattern for both the top and trousers. I used a 100% cotton poplin bought from Edinburgh Fabrics and prewashed before cutting out. I love the green! I also bought pre-made satin bias binding so I could add flat piping. The five buttons were chosen from my button tin.
Where do I start with this? Maybe the trousers as I sewed them up first. I've already made the shorts previously so I knew the body part fitted well size-wise. I'd already added a good few inches to the rise and didn't alter that for the trousers. I added quite a few inches to the trouser legs #sewingtall. I added the bottom bands from the pattern and added flat piping too. But...I don't like how thick the band is (I didn't alter this, they're cut as per the pattern).
I absolutely love the pockets, though! The waistband is cut separately and sewn on. I don't like having a wide piece of elastic in a wide waistband like this so sewed two channels and added narrower elastic in each channel. I wish I'd made the waistband 50% narrower and used one length narrower elastic but this is just a personal preference.
But the worst crime of all is that they are too short. Just half an inch too short. But enough to be flappy...*shudder*. This is the stuff of nightmares for me. This was my fault as I trimmed too much off the leg length before sewing on the bands. Nobody else to blame here!
Now, moving on to the top. I hate the collar. It's just too wide and sits too high up my neck (I have a long neck). I like how the two piece undercollar is cut on the bias. I also have to say that I absolutely, totally and utterly HATED (yes I know I'm shouting) the instructions for sewing the collar and front facings on to the body. I think it is overly-complicated, has too many little steps in it and there are far easier methods out there.
I added a 1" FBA to the front just to make sure there would be enough room. That worked well and there is a small dart. The front and back body of the top fits well and I really like the shirt tail curved hem shaping. The flat piping is a little wide for my liking but that's probably because there isn't any piping cord inside the take up the slack. I have to say, the piping does meet perfectly at the inner corners of the collar.
By this point in the pyjama sewing journey I was fed up and just wanted to finish the damned things! I cut out but didn't bother sewing the sleeve bands. The buttonholes went in ok and I sewed the buttons on. Gave it a final press and tried it on.
Oh dear! That's when I found out the trousers were too short and the collar wants to sit it's own way. Taking these photos, I noticed that the sleeves each have a huge vertical wrinkle. Have you got any idea why? I haven't. I sewed the sleeves on flat as instructed by the pattern and also because that's how I do them, if I can. I matched all the notches and the dot at the sleeve top and shoulder seam. So why the big wrinkles? And what's going on with the top button and lower collar? Nothing I do makes it sit properly.
I wanted to bin them there and then. But I decided to see if they would grow on me after a few wears. They haven't. I went back to my favourite pyjamas sewn using Kwik Sew 2811 last night and the green pair are lying on the bedroom floor ready to start their probably quite quick journey to the bin. I will remove the buttons first though!